|
oVirt 4.1 : Configure oVirt Node
2015/07/12 |
|
Configure oVirt Node. This example is based on the environment below.
+----------------------+
10.0.0.30| [ oVirt Management ] |
+-----+ dlp.srv.world |
+-----------------+ | | |
| |10.0.0.100 | +----------------------+
| Client Computer |---------------+
| | | +----------------------+
+-----------------+ | | [ oVirt Node ] |
+-----+ node01.srv.world |
10.0.0.51| |
+----------------------+
|
| [1] |
Install KVM on oVirt Node, refer to here.
(For bridge network settings in the section [2] on the link, it's no needs to configure it) |
| [2] | Install some required packages for oVirt node. It's OK all. For other some required settings, bridge networking and other, it will be configured automatically by oVirt admin server. |
|
[root@node01 ~]#
[root@node01 ~]# yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm yum -y install vdsm
|